Technical information series 140


Solvent based printing inks for flexo printing


Ink intended for flexographic printing.Its main application  is for Internal, front print on following substrate.

  • Polyethylen


Very high adhesion and strong on the surface

Very high Resistance rubbing and abrasion

High scratch resistance

High thermal resistance

High ink rheology

Very good printability

High ability to add solvent to ink

Very high gloss

High transfer from stereo to print surface

Viscosity of printing:

Viscosity:  30- 40seconds (DINCUP4) at temperature 20 degree


With doctor blade:22-24 seconds (DINCUP4) at temperature 20 degree

Without doctor blade:18-20 seconds (DINCUP4) at temperature 20 degree

Preparation for printing:

  • Use of solvent 9014
  • Slow: Ethyl glycol
  • Fast: Ethyl acetate

Adding only thinner or excessive use of solvent to cut down strength may alter the Characteristics of the product.

[wpdm_package id='1583']

Recommend the use of extender varnish for cut down the strength.


Store the ink in the original packing at a temperature not below  and not in direct contact with sunlight.


18 kg drum

Larger container on request